Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGenie Garage Door in Sunrise, FL
We provide independent Genie service across Sunrise, and the one thing that makes our Genie work here different is what we find inside the houses: original openers from the 1980s and 90s, still bolted to the ceiling of homes across the city. As an independent Genie service provider, we’re not manufacturer-affiliated or authorized, so our only loyalty is to the fix that actually makes sense for your door. We repair, install and calibrate Genie openers and work on the full system around them.
Call (855) 697-3734 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Sunrise Residents Choose Us for Genie Service
Sunrise has an unusual concentration of Genie equipment still in daily use. The tract homes built here through the 1980s and 90s came with builder-grade doors and openers, and a good share of those openers were Genie units. That means we spend a lot of our Genie time in Sunrise on systems that are decades old, which is a different job than working on a new install.
Our technicians have up to 15 years of experience, and they see Genie hardware constantly. They know how the older chain-drive and screw-drive units behave, and they know what today’s belt-drive systems need. When a part needs to be replaced, we use genuine Genie parts for critical components like gears and circuit boards whenever they’re available, and quality aftermarket equivalents for wear items like belts and sensors. The goal is simple: the part fits, it lasts, and the door works.
We work on eight major brands, so we’re never pushing one system. If you’ve got a Genie, we’ll service the Genie. If your Genie has reached the end of the line, we’ll tell you that honestly instead of selling around it. Clear scheduling matters too: you get a time, a price quoted before any work starts, and a technician who knows the opener on your ceiling.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Common Genie Garage Door Problems We Solve in Sunrise
Genie equipment fails in patterns. Here are the failures we see most in Sunrise, and why they show up here:
- Grinding and stalling in older screw-drive openers. Worn drive gears are the classic failure in 1990s Genie screw-drive units, and Sunrise’s original tract homes are full of them. The noise gets louder over months, then the door stops lifting. It’s a mechanical wear problem, not a mystery.
- Doors that reverse or refuse to close. Failed, missing or misaligned safety sensors cause this constantly, and many pre-1993 Genie openers in Sunrise never had modern sensors installed. A door that reverses on its own is a safety issue, not a quirk.
- Corroded boards and remote receivers. South Florida’s salt-laden air and humidity work on exposed circuit boards and receivers year after year. Sunrise’s coastal-adjacent conditions speed this up, and remotes that once worked from the driveway start needing a few feet.
- Stripped plastic gears in belt-drive openers. Years of UV degradation and heat cycling on Genie belt-drive units eventually strip the plastic gears, and the opener slips or quits. Heat and sun exposure drive this one in Sunrise.
- Opener, door and spring failures stacking up. When a 25- to 35-year-old door, its springs and its opener all age at once, a single failure can look like three. We diagnose the whole system so you’re not replacing one part and calling back for another.
Genie Service in Sunrise: What Local Conditions Mean for Your Equipment
Sunrise ran a building boom through the 1980s and 90s, and the concrete-block homes in planned communities like Sunrise Lakes and Sunrise on the Green were finished at roughly the same time. That timing is the story. Most garage doors in those communities are now 25 to 35 years old, and their springs and openers have reached the end of their service life together instead of one at a time. For Genie owners, that shows up in a specific way: the opener is often original, the springs are original, and the unit may never have had modern safety sensors installed. So a single repair call turns into a decision about the whole system. There’s a citywide safety upgrade need here that doesn’t exist at the same scale in neighboring areas, because no neighboring city aged out of its original garage doors all at once. In a typical Sunrise tract home, a Genie screw-drive opener from the 1990s starts grinding loudly and eventually stops moving the door, usually from worn drive gears and a failing logic board. A qualified technician would inspect the opener, confirm the gear wear, and lay out two paths: replace the gear set and board, or move up to a modern belt-drive unit with safety sensors. Humidity and salt air that accelerate corrosion make that second option worth considering when the unit is already this old.
Genie Models & Products We Service in Sunrise
We service the Genie opener families you’ll find on Sunrise ceilings, from older chain-drive units to today’s smart belt-drive models like the Genie SilentMax 750 and Genie StealthDrive Connect, along with screw-drive systems such as the Genie ChainMax 1000 and Genie Excelerator. We also handle the mechanical side around the opener: springs, cables, tracks, rollers and door panels.
Choosing parts comes down to fit and function. For critical components, genuine Genie parts are the first choice when they’re available. For wear items, quality aftermarket parts do the job, and we only recommend what will hold up in South Florida’s heat and humidity. You get an honest read on whether the unit is worth repairing or should be replaced. Older Genies with obsolete parts sometimes aren’t worth the investment, and we’ll say so.
See the difference
Before
After
Before
After
Before
AfterGenie Service Pricing in Sunrise
Genie opener repair in Sunrise typically runs $120 – $320. Every price below is an estimated range, and the written estimate sets the final price after we’ve seen your door and opener.
| Service | Typical Estimated Range |
|---|---|
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Sensor Calibration | $120 – $240 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
What drives the cost is which part failed, whether the opener is repairable or obsolete, and how much of the system needs attention at once. A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range. The free estimate includes a full look at the opener, springs, cables and door balance, plus a written price you agree to before any work starts. Nothing gets added after the fact.
Call (855) 697-3734 for an exact quote. Estimates are free.
Serving Sunrise, FL – Our Local Coverage Area
We serve Sunrise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Genie Garage Door in Sunrise
Often yes. We can add or calibrate safety sensors on many older Genie openers, and sensor calibration is part of what we do in Sunrise homes with original equipment. In some cases the opener’s board or wiring won’t support modern sensors cleanly, and we’ll tell you that before you commit. Call (855) 697-3734 and we’ll walk you through it.
Grinding that comes with failed lifting usually means stripped or worn internal gears. On Genie belt-drive openers, years of heat cycling and UV exposure wear the plastic gears until the opener slips under the door’s weight. A technician can confirm the wear and quote the repair or a replacement unit.
Not usually. A remote that works only up close points to a weak receiver or corroded board rather than a dead battery, and South Florida’s humid, salty air makes that common here. We check the receiver and the board, then repair or replace the affected part.
Yes. Original Genie openers in Sunrise on the Green and Sunrise Lakes are a large part of what we service. We diagnose the failure, check whether parts are still available, and give you a straight answer on repair versus replacement. Call (855) 697-3734 to book a visit.
Genie opener installation in Sunrise typically runs $250 – $550, estimated. The final figure depends on the opener you choose, the condition of the door and springs, and any track or sensor work needed. Call (855) 697-3734 for a free estimate; the written quote is the price you pay.
Service Areas Near Sunrise
We serve Genie owners throughout the area, including Sunrise, Coral Springs, Margate, Parkland, Tamarac, North Lauderdale and Coconut Creek. We also cover Lauderdale Lakes and Lauderhill for Genie repair and installation. Wherever you are nearby, the approach is the same: an independent Genie specialist, quality parts, and a price agreed before work starts.
Book Your Genie Service in Sunrise Today
If your opener is grinding, reversing or unresponsive, don’t leave the door half-working. Our technicians diagnose and repair Genie systems, calibrate sensors, and replace openers when repair stops making sense. Same-day service is often available for repair calls. Call (855) 697-3734 for your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Coral Springs Garage Door Repair Pros.