Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Coral Springs?
Spring replacement in Coral Springs typically costs $180 – $340 for one spring, and most jobs are finished the same day the door fails. That estimate covers the spring, the labor, and the safety check on the rest of the system. If both torsion springs snapped together, expect a matched pair at roughly twice that range, near $360 – $680. Coral Springs Garage Door Repair Pros works on the springs and openers you already have, whatever brand is bolted to the ceiling.
Call (855) 697-3734 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
These are typical estimated ranges for the Coral Springs market in 2026. The written estimate sets the final price, and every job is priced per door, not per hour.
| Line item | Typical estimated range |
|---|---|
| One torsion spring, replaced (standard residential) | $180 – $340 |
| Matched pair of springs, replaced together | About twice the single-spring range |
| Spring repair (re-tensioning or re-seating, not a full swap) | $180 – $340 |
| Lift cables run through the springs | $130 – $250 |
| Opener repair, if the motor was strained or the travel limits drifted | $120 – $320 |
| Track realignment after a spring failure threw the door off square | $120 – $240 |
| Roller replacement, usually combined with the spring job | $110 – $220 |
| Panel replacement, if a snapped spring dropped the door | $250 – $500 |
| Full garage door repair visit, several issues at once | $150 – $600 |
| New door installation, if the door itself is past saving | $700 – $2200 |
Cables and rollers rarely fail on their own. They wear out alongside the springs, and a technician who has the door open will see both. That’s why a “$180 spring” can turn into a $300 visit that also fixes the cable and swaps the rollers. It’s honest work, not an upsell, and it’s cheaper than paying for a second trip a month later. If you want the broader picture of everything that can fail on a door, our Coral Springs Garage Door Repair Pros page covers it.
The other side of it: some springs are still fine. If the door only feels slightly stiff, a technician may re-tension what’s there instead of replacing it. We’d rather do that than sell you hardware you don’t need.
What Affects Spring Replacement Pricing in Coral Springs
- Single spring versus matched pair. Most garage doors have two torsion springs, and they’re almost always replaced at the same time. When one snaps, the other has usually lived the same life and will go within weeks. That’s the biggest single driver of the bill, and it’s why a pair costs about double one spring.
- Spring type and size. Standard torsion springs cost less than the heavy-duty options for tall or wide doors. A double-wide door on a large Coral Springs home may use springs rated for more weight, and those cost more to source.
- Extension versus torsion systems. Older doors in parts of Coral Springs still use extension springs running along the track. They’re a different profile, different hardware, and sometimes a different price point than torsion. A technician can tell you which you have in under a minute.
- Whether the door dropped. When a spring breaks, the door can come down unevenly and bend a panel or knock the track out of line. That turns a spring job into a spring-plus-panel job, and the price climbs toward $500 – $600.
- Attic and ceiling clearance. Low ceilings and tight spaces over the door make some spring jobs slower. This shows up more in older construction than in newer builds, and it affects labor timing, not the parts.
- Door weight. Insulated doors, glass-panel doors, and wooden doors weigh more than a bare steel door, and they need heavier springs. A heavier spring costs more than a lighter one, and it’s a safety issue if someone installs the wrong one.
Our technicians have up to 15 years of experience with the eight major brands most Coral Springs homes use: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters here because spring sizing is tied to the door, not the brand. We match the spring to your door, not to whatever happens to sit on a shelf.
Is It Cheaper to Repair or Replace a Spring?
Repairing or replacing a spring is almost always cheaper than ignoring it, and it’s cheaper than replacing the door. A spring swap runs $180 – $340 for one spring. A new door installation runs $700 – $2200. There’s no reasonable scenario where a failed spring justifies a whole new door unless the door itself is already damaged.
The real question is what else got stressed. When a spring breaks, the opener keeps pulling a door that’s suddenly much heavier. That can burn out the motor, strip a gear, or knock the travel limits out of adjustment. If the opener was strained, the visit might also include opener repair at $120 – $320. It still beats a dead opener later.
One more thing: a door that’s been “working” but feels heavier and won’t stay up halfway is a warning sign. That’s a spring losing tension, not the opener failing. Catch it before it snaps and you’ll be looking at our spring replacement service instead of a full repair visit.
What a Typical Spring Replacement Job Involves
The job starts with a measurement of the door’s weight and a look at the existing springs. Spring size is set by door weight, so getting it right avoids a door that runs fast or won’t balance. The technician winds and locks the new springs, then runs the door up and down to set the travel.
Cables, drums, and rollers get checked while the tension is off. Any cable that’s frayed or any roller that’s flat gets flagged, and you’ll get a price before anything else is touched. A quick balance test tells you if the door stays put when you let go at halfway. Once everything passes, the door is cycled several times to confirm the springs don’t creep.
Most spring jobs take one to two hours. If the track is bent or a panel is cracked, add time. A typical visit in Coral Springs gets you a door that opens smoothly and a spring that won’t surprise you at 7am on your way out.
Safety: Why Spring Work Isn’t a DIY Job
Torsion springs are under significant tension, and the winding bars that hold them in place are the one tool that can turn a stuck door into a serious injury. We don’t advise homeowners to touch them, and that’s not a sales pitch. It’s the part of a garage door that sends people to the emergency room.
What you can safely do is listen and look. A loud bang from the garage, a door that feels heavier than it used to, or a gap in the spring coil are all signs to call. Don’t force the door open by hand, and don’t stand under it while it’s hanging oddly. We answer 24/7, so if a spring breaks in the evening, call and we’ll book you into the next opening, Sunday through Friday, 7am to 7pm.
How to Save on Spring Replacement
- Get a written estimate first. Ask for the price in writing before the work starts, and ask whether a pair or a single spring is included. That’s the simplest way to keep a job near the low end of the range.
- Handle the small stuff in the same visit. If a technician is already inside the door, swapping a flat roller at $110 – $220 range or fixing a drifted track saves you a second dispatch later.
- Don’t wait for the second spring. A matched pair replaced together costs about twice a single spring, but two separate visits can cost more than one pair job because each trip has its own estimate and labor.
- Ask about the door’s balance first. A door that doesn’t stay up halfway needs service, and a quick check prevents a full panel repair that runs $250 – $500.
- Keep the opener out of it. If the door won’t open and the opener still hums, stop cycling it. Every cycle with a broken spring wears the motor and can add $120 – $320 of opener repair to the bill.
Estimates here are free, and the price is set per job. Call (855) 697-3734 and we’ll walk you through what’s typical for your door.
Same-Day Spring Repair and Emergency Service
Spring failures don’t pick a convenient time, and the door usually won’t open when they do. A broken spring on the way out the door in the morning leaves you blocked in or locked out. We offer same-day service and emergency garage door repair for exactly that situation, and the price is set per job by the written estimate.
Call (855) 697-3734. We answer 24/7, and we dispatch technicians from 7am to 7pm, Sunday through Friday. We’re closed on Saturday. A call that comes in outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Our range covers the door, the opener, and the springs that hold it all together, plus new installation if you’re replacing rather than repairing. If you’re not sure whether your door is fixable, a technician can tell you on site.
Why Coral Springs Homeowners Call Us
Coral Springs homes have a mix of original doors and replacements, and not every garage door company wants to work on a brand they don’t sell. We do. Our technicians are certified across eight major brands, so a Clopay door with a LiftMaster opener is a normal day, not a reason to pass.
We treat the spring as the part most likely to strand you, so we take it seriously. Our technicians have up to 15 years of experience and know the difference between a worn spring and a door that needs a bigger fix. We repair when possible and replace only when necessary, and you’ll hear the reason either way.
Spring, opener, or door, we handle it in one call. That saves you from calling around to two or three companies for one broken door.
Frequently Asked Questions
How much does spring replacement cost in Coral Springs?
Spring replacement in Coral Springs costs $180 – $340 for one spring, and a matched pair runs about twice that. The written estimate sets the final price, so ask for it before work starts. Call (855) 697-3734 for an exact quote. Estimates are free.
Can you fix a broken spring the same day?
Yes. We offer same-day service for spring failures and dispatch technicians from 7am to 7pm, Sunday through Friday. Call early and there’s a good chance you’ll be back up and running by the afternoon. Call (855) 697-3734 to get on the schedule. Estimates are free.
Is it cheaper to repair or replace a garage door spring?
Repairing or replacing the spring is far cheaper than replacing the door: $180 – $340 versus $700 – $2200 for new installation. A spring swap is the right call unless the door panels and tracks are already damaged. Call (855) 697-3734 for an honest read on which you need. Estimates are free.
How much does it cost if the door also needs a cable or track repair?
A cable repair adds $130 – $250 and a track realignment adds $120 – $240 when combined with a spring job. A visit handling several issues at once usually lands in the $150 – $600 range for garage door repair. Call (855) 697-3734 for an estimate covering the full job. Estimates are free.
Do you work on my brand of garage door and opener?
Yes, we work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. Spring sizing depends on the door’s weight, so the brand matters less than a correct measurement. Call (855) 697-3734 and we’ll confirm your system. Estimates are free.
Pricing reflects the Coral Springs market as of 2026. Coral Springs Garage Door Repair Pros offers free estimates – call (855) 697-3734.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Darnell Carter"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Dustin Lawson"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Darius Prince