Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Sunrise
If a spring just snapped and your door won’t lift, you need a real answer fast, not a sales pitch about a whole new door. Garage door spring repair in Sunrise typically runs $180 – $340 for a single spring, and we can usually get a technician out the same day you call. We know Sunrise well, from the older tract streets off Sunrise Boulevard to the villas tucked into Sunrise Lakes, and we know the specific hardware those homes tend to have. That matters when your door is stuck open and the house is exposed.

Call (855) 697-3734. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Sunrise Homeowners Call Coral Springs Garage Door Repair Pros for Garage Door Spring Repair
Sunrise is a city of planned communities built in a tight window, and that shapes the work. The 1980s and 90s CBS homes in subdivisions like Sunrise on the Green and Sunrise Lakes went up with the same builder-grade 16×7 raised-panel steel doors, which means their torsion springs tend to hit the end of their cycle life in pairs, within a few years of each other. That synchronized failure pattern is something we plan for on nearly every spring call in Sunrise, and it’s why we inspect both springs instead of just replacing the one that snapped.
Our technicians have up to 15 years of experience, and they work on whatever system is already on the home rather than pushing a replacement. We serve Sunrise and the surrounding area through our Sunrise coverage, so when a door fails you’re not waiting on a company three counties away. Whether it’s a spring, an opener, or storm damage after a rough night, we handle the whole job in one visit when we can. The price is quoted and agreed before any work starts, so there are no surprises when the technician finishes.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Sunrise
Springs are the most failure-prone part of any garage door, and on a door that’s a few decades old, they’re often the reason the whole system feels broken. Here’s how we handle the work in Sunrise.
Torsion Spring Replacement in Sunrise
Most Sunrise homes have a torsion spring mounted on a shaft above the door, and when it breaks the door becomes dangerously heavy. We replace the failed spring with a high-cycle unit and check the drums and end bearing plates while we’re up there, since worn plates wear out new springs faster. If your door has a matched pair, we’ll tell you plainly whether the second spring is close to failing so you can decide before it strands you.
Extension Spring Replacement in Sunrise
Some older Sunrise doors use extension springs that stretch along the tracks instead of twisting on a shaft. Salt-laden air and humidity along this stretch of South Florida corrode the steel hooks and cables, and a corroded extension spring can snap without warning. We swap them for new springs and make sure each one is run through a proper safety cable, so a break stays contained instead of flying across the garage.
Broken Spring Repair in Sunrise
When a spring lets go, the door usually won’t open, or it opens partway and jams. We diagnose whether it’s really the spring or an opener that’s been straining to lift a heavy door, because the two problems look alike from the driveway. Repairing the spring first often solves what looked like an opener failure, and it’s the safer, less expensive path when the opener itself is fine.
Spring Adjustment in Sunrise
A door that slams down or drifts back up usually has a balance problem, not a broken spring. We adjust tension so the door holds position halfway up and closes smoothly, which takes strain off the opener motor. On Sunrise doors with wind-rated hardware, correct balance also helps the door seal tight against the frame before a storm.
Safety Cable Installation and Spring Inspection in Sunrise
Safety cables are the cheap insurance on an extension spring system, and they’re missing on plenty of original builder-grade doors around Sunrise. We run a cable through each spring so a break can’t whip through the garage. A spring inspection catches fatigue, corrosion, and worn cables before they fail, which is worth doing once a year on a door that’s closing in on 25 or 30 years old.
Trusted Brands We Service in Sunrise
We work on the systems Sunrise homeowners actually have, which means we’re not locked into one brand. Our technicians are trained across Clopay, Amarr, Wayne Dalton, and other leading door and opener lines, so whether your door is an original builder model or a newer replacement, we can diagnose and repair it. We don’t claim to carry parts in stock, but we do keep turnaround fast by sourcing the right spring for your door’s weight and track setup. If you’re weighing repair against replacement, we’ll give you a straight recommendation and let you make the call.

Common Garage Door Spring Repair Problems We See in Sunrise Homes
Sunrise has a garage door problem most cities don’t: a whole generation of doors aging out at the same time. Here’s what that looks like.
- Paired torsion spring failure on original builder-grade doors. After 20 to 25 years of daily cycles, the factory springs on Sunrise’s 16×7 steel doors often fail within a few years of each other. Homeowners frequently mistake the result for opener failure, because the door suddenly becomes too heavy to lift.
- Corrosion-fatigued extension springs and cables. The salt in the air near the coast and the relentless humidity weaken steel hooks and cables. Springs snap without safety cables and can take out tracks or panels on the way down, turning a simple repair into a bigger job.
- Post-storm track misalignment and bent panels. On doors that aren’t reinforced, wind can knock tracks out of line and bend panels. When spring fatigue leaves a door unable to seal tight before a storm, wind-driven rain gets in and the damage compounds.
- Obsolete openers without modern safety sensors. Many openers from that era lack photo-eye sensors, so a safety reverse failure goes unnoticed until a spring replacement reveals the opener can’t safely lift the door. That’s the moment to talk about the opener too.
See the difference
Before
After
Before
After
Before
AfterWhy Sunrise’s Tract-Home Construction Creates a Citywide Spring Problem
Sunrise is unusual because so much of its housing went up in one stretch, in master-planned communities like Sunrise Lakes and Sunrise on the Green, with identical builder-grade 16×7 raised-panel steel doors. Those doors are now 25 to 35 years old and hitting the end of their spring and opener lifespan at nearly the same time. Where cities with mixed-age housing see failures spread out, Sunrise sees a wave of them. On a typical job in one of these original tract homes, the factory torsion springs have often hit their cycle limit in pairs, and the opener, maybe an old model without photo-eye sensors, is straining to lift a 150 to 350 pound door. A qualified technician usually replaces both springs with high-cycle units, runs safety cables through the new coils, checks the drums and bearing plates for wear, then rebalances the door and tests the opener rail and sensors. If you’re seeing that pattern in your own home, our garage door spring repair team can walk you through it without pressure.
Pricing for Garage Door Spring Repair in Sunrise, FL
Pricing here is per spring, and a matched pair costs about twice a single spring because we replace both. These are typical estimated ranges for the Sunrise market, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Panel Replacement | $250 – $500 |
What moves the number is the type of spring, whether it’s one or a pair, and whether the cables, drums, or tracks need attention too. We inspect before we quote, tell you what we find, and get your agreement on price before any work starts. Estimates are free. Call (855) 697-3734 for an exact quote.
We Also Serve Cities Near Sunrise
We help homeowners throughout the area, including Lauderdale Lakes and Lauderhill to the east, and Tamarac and North Lauderdale just to the north. The same 1980s and 90s tract-home construction that defines Sunrise shows up in pockets of these neighboring cities, so the spring work isn’t unfamiliar. If you’re just outside Sunrise, call and we’ll confirm we can reach you.
Serving Sunrise, FL – Our Local Coverage Area
We serve Sunrise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Sunrise
Your springs break in pairs because both springs on the door have done the same number of cycles since the day the house was built. Sunrise’s 1980s and 90s tract homes went up with identical builder-grade doors, so when one spring hits its cycle limit the other is usually close behind. We recommend replacing both at once so you’re not calling us back in a few months.
Yes. A door that can’t lift or seal properly leaves a big opening that wind-driven rain and pressure can work against. In a storm, an unbalanced or unreinforced door is one of the weakest points on the house. Getting the springs and tracks checked before the season starts is part of storm prep in Sunrise.
If the opener struggles, sounds labored, or the door only opens partway, the spring is often the real cause, not the motor. An opener from that era trying to lift a 150 to 350 pound door with a broken or weak spring will overheat and wear out fast. We test the door balance and the spring tension first to find out which one is failing.
The most common upgrade is safety cables run through new extension springs, plus a careful look at the opener’s photo-eye sensors. Many original Sunrise openers lack working sensors, so a spring replacement is a good moment to fix that. We check the drums, cables, and sensors as part of the job, and we tell you what we recommend before doing the work.
Spring repair itself usually doesn’t need a permit, but any change to wind-rated doors or reinforced tracks often does, so ask the city’s building department to be sure. We can point you in the right direction and explain what typically triggers a permit. If your work involves a new wind-rated door, check with the city before scheduling.
When a spring fails, the door needs a trained technician, not a ladder and a guess. Call (855) 697-3734 for a free estimate on garage door spring repair in Sunrise. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Coral Springs Garage Door Repair Pros.